BlueCast LCD/DLP Original

€100.00

BlueCast LCD / DLP

Castable: YES - Castability: Excellent

Compatible with: all LCD printers like Wanaho D7, Anycubic 3d, Phrozen Shuffle, Micromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power) and with all LED UV DLP printers like as Asiga, 3DS Project 1200, Kudo Titan 2, Miicraft, Ember, B9 (black resin profile) etc.

Washing mode: Ethyl / IPA alcohol 30 seconds _ Drying with compressed air

UV cure: 30 - 60 min. When completed, the print come white

Shrinkage: Low

Tank bottom: FEP

Color: Green

Size: 500 gr

100% secure payments
Quantity
Last items in stock

BLUECAST LCD/DLP Original / LS23

Tuned for LCD/DLP machines are also compatible with almost of DLP 3d printers (405 nm).

Wery low shrinkage and High Accuracy

Suitable for filigree, micrò pave, stones settings, silver design and standard jewelry.

Minimal residue after burnout process (0.003%)

Low-exhaust emission during the burnout process

Virtually no expansion of resin during burnout process

Compatible with all investments (Tested with Kerr® Satincast, R&R PlastiCast, Optima Prestige, Omega Plus)

Excellent castability

Washable with 90%/99% denatured alcohol (IPA) or ethyl alcohol 90%/99%.

Very low deformation during post-printing

Direct casting of models with no need for lacquer or Teflon® (PTFE) spray

High definition and smoothness surfaces

Remarkable definition of micro-engravings and micro-reliefs

INSTRUCTIONS

MSDS

BURNOUT

LCD/DLP 23LS 500gr
1 Item