Home

Showing 25-46 of 46 item(s)

BlueCast Resins

BlueCast X10 SLA/DLP

BlueCast X10 for SLA/DLP Castable: YES - Castability: Excellent Improved Castability improved Dimensional stability improved Buildin platform adhesion improved Suitable for all kind of jewelry Compatible with: all SLA and DLP printers Washing mode: Ethyl / IPA alcohol 30 seconds _ Drying with compressed air UV care: Not needed Shrinkage: Negligible...

BlueCast Resins

BlueCast X10 LCD

BlueCast

BC X10 LCD/DLP 250 - 500gr

€119.00

BlueCast X10 for LCD Castable: YES - Castability: Excellent Improved Castability improved Dimensional stability improved Buildin platform adhesion improved Suitable for all kind of jewelry Compatible with: all LCD printers like Wanaho D7, Anycubic 3d, ZORTRAX, Prusa, Phrozen, Micromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power)...

BlueCast Resins

BlueTech EcoGray LCD/DLP

BlueCast

EcoGray LCD/DLP 500gr

€55.00

BlueCast LCD/DLP EcoGray Castable: NO - Castability: nd Applications: Dental Model Compatible with: all LCD printers like Phrozen Shuffle, Wanaho D7, Anycubic 3d, Micromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power) and with all LED UV DLP printers like as Asiga, 3DS Project 1200, Kudo Titan 2, Miicraft, Ember etc. Washing mode:...

Consumables

Phrozen WAX by BC

BlueCast

Phroxen WAX

€85.00

Phroxen WAX for Shuffle 3dp and all LCD/DLP Castable: YES - Castability: Good Compatible with: all LCD printers like Wanaho D7, Anycubic 3d, Zortrax, Prusa, Micromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power) Washing mode: Ethyl / IPA alcohol 30 seconds _ Drying with compressed air UV care: 15 min Shrinkage: 3% Color: Wax Color...

Consumables

Easy Z0 - Phrozen Shuffle

BlueCast

EZ0 shuffle

€119.00

EasyZ0 - The only mode to do easy the Z0 on 3d Shuffle by Phrozen. Don't require any irreversible modification to your printer and solve all calibration problem. Easy to fit, easy to use make easy your printing process. The kit is supplied with all it is needed for an easy assembly. Solve all the stability iusse of platform. Preserves the LCD screen from...

BlueCast Resins

BlueCast Asiga

BlueCast

BCF Asiga 500gr

€110.00

BlueCast Original for ASIGA Castable: Yes - Castability: Excellent Compatible with: ASIGA Pico 2 machines UV care: Not needed Shrinkage: Medium Color: Blue Primercat: Suggested Size: 500 gr

BlueCast Resins

BlueCast X5 LCD/DLP

BlueCast

BCF X5 LCD/DLP 500gr

€119.00

BlueCast X5 for LCD/DLP Castable: YES - Castability: Excellent Compatible with: all LCD printers like Wanaho D7, Anycubic 3d, ZORTRAX, Prusa, Phrozen, Micromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power) Washing mode: Ethyl / IPA alcohol 30 seconds _ Drying with compressed air UV care: Not needed Shrinkage: Minimum Color: Light...

BlueCast Resins

BlueCast X5

BlueCast

BCF X5 500gr

€119.00

BlueCast X5 for Formlabs and SLA 3d printers Castable: Yes - Castability: Extreme Compatible with: Form1+ (castable v2) / Form2 (gray v3) / Dws (dc400) / b9 (emerald) / Solus e stampanti SLA (405 nm) Washing mode: Ethyl / IPA alcohol 30 seconds _ Drying with compressed air UV care: Not needed Shrinkage: Minimum Color: Light Blue Primercat: Suggested...

Out-of-Stock

Others

Easy Z0 - Anycubic Photon

BlueCast

EZ0 anyc

€19.99

EasyZ0 - The only mode to do easy the Z0 of Anycubic 3d printer. Don't require any irreversible modification to your printer and solve all calibration problem. Easy to fit, easy to use make easy your printing process. The kit is supplied with all it is needed for an easy assembly. INSTRUCTIONS

View

BlueCast Resins

BlueCast KeraMaster Dental Model Formlabs

BlueCast

KM Dental FL 500gr

€75.00

BlueCast Keramaster Dental Model - FORMLABS Castable: NO - Castability: nd Applications: Dental Model Compatible with: Form2 Washing mode: Ethyl / IPA alcohol 10 min _ Drying with compressed air UV cure: 30 min. Shrinkage: Low Color: Beige Printing profile: Gray v4 Primercat: needed Size: 500 gr INSTRUCTIONS

BlueCast Resins

BlueCast KeraMaster Dental Model LCD/DLP

BlueCast

KM Dental LCD/DLP 500gr

€75.00

BlueCast LCD/DLP Keramaster Dental Model Castable: NO - Castability: nd Applications: Dental Model Compatible with: all LCD printers like Wanaho D7, Anycubic 3d, Micromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power) and with all LED UV DLP printers like as Asiga, 3DS Project 1200, Kudo Titan 2, Miicraft, Ember etc. Washing mode:...

Out-of-Stock

Consumables

Build platform Form 2

Formlabs

Build Platform v1

€90.00

View

Out-of-Stock

3d Printers

Craftbot +

Craftbot

CB +

€1,250.00

Print technology: FDM _ Filament Core XY Filament Diameter: 1.75 Printing volume: 250x200x200 Nozzle diameter: 0.4 mm _ N extruders: 1 Maximum extrusion temperature: 260 ° C Heated plate: YES - Maximum temperature 110 ° C Resolution Z: 0.05 - 0.40 mm - Resolution XY: 0.04 mm Minimum thickness of the surfaces:> 0.8 mm Printing speed: 50 - 200 mm / s...

View

3d Printers

Craftbot 2

Craftbot

CB 2

€1,350.00

Print technology: FDM _ Filament Core XY Filament Diameter: 1.75 Printing volume: 250x200x200 Nozzle diameter: 0.4 mm _ N extruders: 1 Maximum extrusion temperature: 260 ° C Heated plate: YES - Maximum temperature 110 ° C Resolution Z: 0.05 - 0.40 mm - Resolution XY: 0.04 mm Minimum surfaces thickness:> 0.8 mm Printing speed: 50 - 200 mm / s...

3d Printers

Craftbot XL

Craftbot

CB XL

€1,999.00

Print technology: FDM _ Filament Core XY Filament Diameter: 1.75 Printing volume: 300x200x440 Nozzle diameter: 0.4 mm _ N extruders: 1 _ Interchangeable nozzle kit Maximum extrusion temperature: 260 ° C Heated plate: YES - Maximum temperature 110 ° C Resolution Z: 0.05 - 0.40 mm - Resolution XY: 0.04 mm Minimum thickness of the surfaces:> 0.8 mm...

Out-of-Stock

Consumables

Resin Tank Form 2

Formlabs

Resin Tank v1

€55.00

The resin tank is polycarbonate made. It is supplied with a reusable wiper and a plastic cover to make easily the storage.

View

Out-of-Stock

Consumables

Form Cure

Formlabs

Form Cure

€699.00

- Advanced heating: accurate temperature control is the key to perfect post-curing. The Form Cure is able to reach temperatures up to 80 ° C. - Balanced UV light: 13 LEDs /405 nm optimize the post-curing process. - Uniform exposure: a rotating platform, a homogenic heat flow and diffused lights guarantee a uniform exposure during the post-curing process....

View

Out-of-Stock

Consumables

Form Wash

Formlabs

Form Wash

€499.00

- Accurate cleaning: the propeller agitates isopropyl alcohol (IPA) around each corner of the printed piece, doing a perfectly clean - every time. - Built to fit perfectly with the Form 2 platform: the prints pass perfectly from your Form 2 to the Form Wash; it is possible to keep the prints attached to the platform or to place them directly in the cart....

View

-€600.00

Out-of-Stock

3d Printers

Formlabs FORM 2

Formlabs

Form 2

€2,699.00 €3,299.00

Print technology: SLA _ Resin Print volume: 140x140x175 mm Laser spot: 140 mn Laser power: 250 mW Resin heating: SI - Autorefill: SI Resolution Z: 0.025 - 0.10 mm X / Y positioning: 1.5 microns Recommended minimum thickness of the surfaces:> 0.4 mm Connectivity: WiFi, Eterneth, USB - Management software: Preform Printable materials: Resins 405 nm...

View

BlueCast Resins

BlueCast LCD/DLP Original

BlueCast

LCD/DLP 23LS 500gr

€100.00

BlueCast LCD / DLP Castable: YES - Castability: Excellent Compatible with: all LCD printers like Wanaho D7, Anycubic 3d, Phrozen Shuffle, Micromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power) and with all LED UV DLP printers like as Asiga, 3DS Project 1200, Kudo Titan 2, Miicraft, Ember, B9 (black resin profile) etc. Washing mode:...

BlueCast Resins

BlueCast LS

BlueCast

BC23LS 500gr

€110.00

BlueCast LS for Formlabs and SLA 3d printers Castable: Yes - Castability: Good Compatible with: Form1+ (castable v2) / Form2 (gray v2) / Asiga Pico 2 (fusiongray 0.025) / Moai / Dws (dc400) / b9 (emerald) e stampanti SLA (405 nm) Washing mode: Ethyl / IPA alcohol 30 seconds _ Drying with compressed air UV care: 60 min Shrinkage: Low Color: Violet...

BlueCast Resins

BlueCast Original

BlueCast

BCF500gr

€100.00

BlueCast Original for Formlabs and SLA 3d printers Castable: Yes - Castability: Excellent Compatible with: Form1+ (castable v2) / Form2 (gray v2) / Asiga Pico 2 (fusiongray 0.025) / Moai / Dws (dc400) / b9 (emerald) e stampanti SLA (405 nm) Washing mode: Ethyl / IPA alcohol 30 seconds _ Drying with compressed air UV care: Not needed Shrinkage: Medium...

Product added to wishlist

Product added to compare.

Cookie name	Provider	Purpose	Expiry
apc_popup_session	https://3dgarage.shop	Used to know if it is a new browser session.	Session
CONSENT	youtube.com	Used to detect if the visitor has accepted the marketing category in the cookie banner. This cookie is necessary for GDPR-compliance of the website.	2 years
cookiesplus	https://3dgarage.shop	Stores your cookie preferences.	1 year
csrftoken:	Meta - Instagram	Protects the user account from cross-site request forgery (CSRF) attacks by verifying that the source of a request matches the authenticated session.
laravel_session	https://3dgarage.shop	Cookie used to identify a session instance for the user.	1 day
mid:	Meta - Instagram	Used to identify the user or device during login or authentication processes.
PHP_SESSID	https://3dgarage.shop	This cookie is native to PHP and enables websites to store serialised state data. It is used to establish a user session and to pass state data via a temporary cookie, which is commonly referred to as a session cookie.	Session
PrestaShop-#	https://3dgarage.shop	This cookie helps keep user sessions open while they are visiting a website, and help them make orders and many more operations such as: cookie add date, selected language, used currency, last product category visited, last seen products, client identification, name, first name, encrypted password, email linked to the account, shopping cart identification.	480 hours
rc::a	Google	This cookie is used to distinguish between humans and bots. This is beneficial for the website, in order to make valid reports on the use of their website.	Persistent
rc::c	Google	This cookie is used to distinguish between humans and bots.	Persistent

Cookie name	Provider	Purpose	Expiry
DEVICE_INFO	youtube.com	Used to track user's interaction with embedded content.	180 days
twk_uuid_#	https://3dgarage.shop		180 days

Cookie name	Provider	Purpose	Expiry
collect	Google	It is used to send data to Google Analytics about the visitor's device and its behavior. Track the visitor across devices and marketing channels.	Session
ds_user_id	Meta - Instagram	stores the user ID associated with the active session for identifying the logged-in user.
r/collect	Google	It is used to send data to Google Analytics about the visitor's device and its behavior. Track the visitor across devices and marketing channels.	Session
TawkConnectionTime	https://3dgarage.shop	Allows the website to recognise the visitor, in order to optimize the chat-box functionality.	Session
_ga	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	2 years
_gat	Google	Used by Google Analytics to throttle request rate	1 day
_gat_gtag_UA_*	Google	Used to throttle request rate.	1 minute
_ga_#	Google	Used by Google Analytics to collect data on the number of times a user has visited the website as well as dates for the first and most recent visit.	2 years
_gd#	Google	This is a Google Analytics Session cookie used to generate statistical data on how you use the website which is removed when you quit your browser.	Session
_gid	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	1 day

Cookie name	Provider	Purpose	Expiry
ads/ga-audiences	Google	These cookies are used by Google AdWords to re-engage visitors that are likely to convert to customers based on the visitor’s online behaviour across websites.	Session
NID	Google	Registers a unique ID that identifies a returning user's device. The ID is used for targeted ads.	6 months

Cookie consent